Albuquerque is a city of walls, and not just the ones holding up yards. From the stuccoed CMU walls in the Northeast Heights to the basalt boulders in Four Hills, retaining walls here fight sandy soil, caliche, and monsoon runoff. If your wall is leaning, cracked, or sliding, you are not alone.
Homeowners in 87101 and across the city call Albuquerque Retaining Wall because we know the difference between a wall that looks good and one that holds. Whether you are near the Rio Grande bosque or up in High Desert, we have seen what works and what fails.
Retaining Wall in Albuquerque (87101)
Albuquerque runs from the cottonwood bosque and irrigated farm lots of the Rio Grande valley up to the East Mesa and the Sandia foothills, and west to the volcanic escarpment of the West Mesa. That means your retaining wall has to handle collapsible sandy soils, caliche layers, decomposed granite washing off foothill lots, a shallow water table near the river, winter freeze-thaw, and July to September monsoon storms that flood arroyos. We build stuccoed CMU, mortared river rock, basalt boulders, gabions along arroyos, and we replace old railroad tie beds that have rotted out. Whether your home is an adobe in Old Town, a 1920s bungalow in Nob Hill, a 1950s stucco ranch in the Northeast Heights, or a newer stucco in Four Hills, the ground under your wall is the same high-desert mix, and it needs drainage and proper footing.
Our team has served Albuquerque and the surrounding areas for years, and we have seen every failure mode this city throws at a wall: leaning, bowing, cracked block, bulging, settling, and collapse after heavy rain. We know the arroyos, the slopes, and the soil.
Our services in Albuquerque
- Retaining Wall Installation in Albuquerque · Design and construction of new retaining walls for foothill lots…
- Retaining Wall Repair in Albuquerque · Repair of leaning, bowing, cracked, or settling retaining walls…
- Retaining Wall Replacement in Albuquerque · Full tear-out and replacement of failed or end-of-life walls…
- Concrete Retaining Walls in Albuquerque · Poured concrete and reinforced CMU block retaining walls with engineered…
- Block & Segmental Retaining Walls in Albuquerque · Segmental retaining walls (SRW) in Allan Block, Versa-Lok…
- Boulder & Natural Stone Walls in Albuquerque · Boulder and natural stone retaining walls that blend into high-desert and…
- Timber Retaining Walls in Albuquerque · Pressure-treated timber walls for raised garden beds and low terraces…
- Slope Stabilization & Erosion Control in Albuquerque · Hillside and arroyo-bank stabilization with terraced retaining walls…
- Retaining Wall Drainage in Albuquerque · Drainage systems that make walls last: French drains, weep holes…
- Railroad Tie Wall Replacement in Albuquerque · Removal and replacement of aging railroad tie retaining walls from the 1970s…
- Leaning & Collapsed Wall Repair in Albuquerque · Priority response for leaning, bulging, and collapsed retaining walls…
How a Job Works in Albuquerque
Step 1: Call us at (505) 312-9278 or request a free on-site assessment. We will look at your wall, check the drainage, and talk through what you need, whether it is a repair, a replacement, or a new installation. We will also flag any permit needs early, since many walls above roughly 4 feet or that support a surcharge require one.
Step 2: We schedule the work and handle the details. In tight lots like Huning Highland or Nob Hill, access can be tricky, so we plan equipment and material staging. If your project needs a permit or engineered drawings, we can point you to the City of Albuquerque website for the building department, and we coordinate HOA approvals if your neighborhood has them. We build with local conditions in mind: proper footing, drainage, and materials that handle freeze-thaw and monsoon runoff.
Step 3: When we finish, we clean up and walk the site with you. We leave your property clean and make sure you know how to maintain the wall and drainage going forward.
Pricing in Albuquerque depends on the wall type, size, access, and condition. For installation, block and segmental walls start at $25 per square foot, timber at $20, and concrete or replacement at $35. Repairs start at $1,500, and drainage work starts at $2,500. Leaning or collapsed wall repair starts at $2,500. Slope stabilization and erosion control get a free estimate. The key cost factors are linear footage, height, soil conditions, access for equipment, and how quickly you need it done. Call (505) 312-9278 for a free estimate and a straight answer.
